Highest rate at 500 KBPS, which support 2-FSK, GFSK and MSK modulation mode.
Modify baud rate with software, better requirement for customers in different conditions of use:
High baud rate: faster data transfer rate
Low baud rate: more strong anti-jamming and penetration ability, the transmission
distance further
High sensitivity (1.2 Kbps down-110 dBm, 1% packet ber)
Built-in hardware CRC(inspection wrong and point-to-multipoint address control)
Lower consumption(RX, 15.6 mA, 2.4 Kbps, which 433 MHz)
Can be programmed to control the output power, for all the support frequency can reach + 10 dBm
Wake-up wireless, support low power electromagnetic wave activated,and wake on lower consumption device
Before transmission channel access will be cleaned up automatically (CCA), named carrier protected reliably against detective system
Fast frequency changes brought the right frequency synthesizer jumping system
Module can be set address software, software programming is very convenient
The standard DIP spacing interface, easy to embedded applications
Separate 64 bytes RX and TX data FIFO
Open the actual transmission distances of up to 200 meters above (depending on the specific environment and Communication baud rate, etc and decide)
نقد و بررسیها
هنوز بررسیای ثبت نشده است.
اولین کسی باشید که دیدگاهی می نویسد “RF1101SE” لغو پاسخ
نقد و بررسیها
هنوز بررسیای ثبت نشده است.